PCB Board Panel Stacking Machine

In order to lower labor costs, LEAD replaced manual operations with an automatic production line for the production of PCB board panels.

• Automatic stack-up
• Automatic breakdown
• Automatic returning of steel plate

Cycle time: less than 8.5 seconds
Single side: up to 280 000 layers/month

Custom designing
Taking into full consideration the workshop layouts and requirements of different customers, the PCB board panel stacking machine can be custom designed to meet customer requirements, thus avoiding any problems during plate production.

Automatic production
The PCB board production line stacks, cuts and measures steel plates, as well as breaks down, returns and cleans them. This ensures production is simplified with a high degree of automation and low cost.

Low energy consumption
In order to decrease energy consumption, the capacity of every unit is calculated and custom designing is essential.

Suction hoist for steel plate

Uses
The Suction hoist can achieve automatic stack-up and breakdown of steel plate

Parameter

• Mode: manipulator operation
• Speed: 12 seconds/layer

Suction hoist for automatic stack-up

Uses
Automatic arranging of plates

Parameter

• Stack-up mode: automatic stack-up
• Paper treatment method: automatic paper preparing by jetting air
• Stack-up speed: 12 seconds/layer

Suction hoist for automatic breakdown

Uses
The Suction hoist can separate steel plate and semi-finished PCB board

Parameter

• Breakdown mode: manipulator separating;
• Separating speed: 7.5 seconds/layer
• Intelligent control: achieve remote monitoring, reserve PLC interface and ERP interface

Automatic cutting machine

Uses
Cutting plates

Parameter

• Cutting mode: automatic cutting;
• Cutting accuracy: length error±0.5mm/m, diagonal error±1mm/m;
• Cutting speed: 10layers/min;
• Loading and unloading methods: automatically to up and down the plates by manipulator
• Stack-up mode: automatically set on the stacking number;