Uses
Automatic arranging of plates

• Stackup mode: automatic stack-up of aluminum foil, copper foil, prepreg, aluminum foil
• Stackup accuracy: ±1.5mm
• Stackup speed: 15 seconds/layer

Uses
Copper foil cutting

• Cutting accuracy: length error±0.5mm/m, diagonal error±1mm/m
• Thickness: 1/3~2OZ
• Cutting mode: automatic cutting
• Cutting speed: 0~60m/min

Uses
The Suction hoist can separate steel plate and CCL

• Breakdown mode: manipulator separating;
• Separating speed: 15 seconds/layer;
• Intelligent control: achieve remote monitoring, reserve PLC interface and ERP interface

Uses
The Suction hoist can flip steel plate over

• Double check the steel plates, and eliminate any problematic ones in order to lower the reject rate.
• Improve the quality by preventing the CCL board from coming into contact with a steel plate exposed to kraft paper
• Avoid uneven force on both sides of steel plate

Uses
Cleaning and drying steel plate

• Speed up to 45m/min;
• Four or two cleaning brush;
• Cleaning water is high pressure water, and can achieve cyclic utilization after filtering;
• Hot drying of fan, or air drying with linear high pressure
• Coated by release agent.